4 Steps for Wallcovering Installation Instruction

Prior to unpacking the wallpaper, check whether the external package is intact and wallpaper pattern, lot number and quantity are consistent with the order. If there is a problem, please stop and get in touch with distributor. No claim can be allowed for faulty goods hung in excess of one roll.

Do remember pasting wallpaper according to carton and label number. Forward and reverse pasting for free match wallpaper.

Installation Instruction:

1.All surfaces to be covered should be clean, dry and free from dust and grease Papered walls must be completely stripped and clean. All cracks and crevices should be filled and smoothed down with sandpaper when dry.

2. To clip the wallpaper based on the reference of actual wall surface area and registration mode of wallpaper. Free match wallpaper should be around 10 cm longer than base surface. If need matching, then according to the actual requirement.

3. Brush the glue uniformly on the back of wallpaper; about 5 minutes later, paste the wallpaper on base-surface by brush. Pay attention to the label number.

4. Align with the vertical line, pasting wallpaper from top to bottom, from inside to corner smoothly. Remove excess air bubbles and glue from the face with a clean wet sponge. When pasting the second one, do match the pattern design with the first one. Cut the redundant wallpaper on top and bottom.