How to Sticker wallpaper to the wall
Author: admin Time: 2017-02-28 19:10:29
1. Paste the most important preparation of the wallpaper is to paste the wall of the wallpaper to do accurate measurement, if the size of the opponent will affect the late wallpaper paste the tedious. After measuring a good need for the walls of the paint and other objects to eradicate the clean-up pave the way.
2. After the preparation work to do the need to cut the wallpaper, do a variety of planning, will cut the wallpaper after the number of easy to paste, while the wallpaper should be soaked in water for about ten minutes.
3. Brush the base film, the base film evenly brush on the wall, the thickness of moderate; scraping putty, polished. On the wall twice put on scratch. And so putty to dry, with sandpaper polished wall, worn off the uneven particles, so that the wall smooth, smooth; with the base film again evenly painted wall (cover paint), without too thick. To ensure that the paste firmly, the back of the wall and the walls should be plastic, glue to brush evenly, can not wrap, from the heap, to prevent dirty wallpaper.
4. The most complete improvement is finishing paper, the principle is the first vertical level, the first after the next, the first high after low. When the first sheet of paper, find the baseline in the corner, hand from top to bottom, from the middle to both sides gently flattened, and then scraping the scraper, so wallpaper and wall paste. When the second wallpaper is attached, it is overlapped with the first web of overlap, and the overlapped portion is cut with a wall knife, and the remaining part is removed and scraped with a squeegee.